Release Agents, Coatings And Fluxes For Hot-Metal Work
Pyroflux India formulates boron nitride coatings, zircon mould coatings, centrifugal die coatings, die-casting release agents, forging lubricants and melt fluxes for foundries, die casters, extruders, forges and glassworks, and exports them worldwide.
Common Issues
Aluminium Sticking To Billets, Dies Or Tooling
Boron nitride release coatings that molten and hot aluminium does not wet.
Pyrolube 20 · BN wax sticks · BN 5026See The Fix →Metal Penetration And Burn-On On Steel Castings
Zircon mould and core washes for heavy MS, SS and alloy steel sand castings.
Maxcote 100 · Technomol 256 · Isocote 100See The Fix →Poor Surface Or Sticking In Centrifugal Casting
Semi-permeable, low-gas die coatings for spun pipes and cylindrical castings.
Spuncote · WallcoteSee The Fix →Soldering And Short Die Life In Die Casting
Water-based die release and plunger lubricants for aluminium pressure die casting.
Alucoat range · plunger lubricantsSee The Fix →Dross, Gas And Inclusions In Brass And Copper Melts
Cover, refining and degassing fluxes for copper-base alloys and aluminium.
Cuprit 49 · Copperit 8 · CoverfluxSee The Fix →Die Wear And Poor Fill In Hot Forging
Graphite and graphite-free die lubricants for steel, aluminium and yellow metals.
Forgecoat rangeSee The Fix →Glass Sticking To Press Moulds And Plungers
Boron nitride base coat and top-up for glass tableware moulds.
Pyrolube 25MG · 10G · Nano 20See The Fix →Gaskets Sticking To Flanges After Service
Anti-stick release coatings for fibre, rubber, paper and metal gaskets.
Graphex range · BN-20See The Fix →
Boron Nitride In The Form Your Process Needs
Hexagonal boron nitride is white, does not oxidise below about 900 °C in air, and is not wetted by molten aluminium, magnesium, zinc or glass. That makes it the cleanest release coating for extrusion billets, casthouse tooling, die casting and glass moulds, and the reason it replaces graphite where carbon pick-up or black residue is a problem.
New to boron nitride? Read boron nitride vs graphite or how to choose the form.
For Ferrous And Non-Ferrous Foundries
Zircon Mould And Core Coatings
Refractory zircon washes for heavy MS, SS and alloy steel sand castings, and heavy nickel and copper-base castings. They stop metal penetration and burn-on and leave a clean, easily fettled surface.
Maxcote 100 · Technomol 256 · Isocote 100 · Mouldcote MG
Zircon Mould Coatings →
Centrifugal Casting Die Coatings
Semi-permeable, low-gas die coatings for spun pipes, liners and cylindrical castings in grey iron, non-ferrous alloys and low and high alloy steels, in grades matched to die temperature and wall thickness.
Spuncote 100 · 200 · 300 · Wallcote 300 · 100
Centrifugal Die Coatings →From Enquiry To Production In Four Steps
- Tell Us The ProcessMetal, temperature, atmosphere, how you apply today and what is going wrong.
- Get A RecommendationWe name a grade, send its TDS and SDS, and explain how to apply it.
- Trial It On Your LineA trial quantity with a written procedure. We adjust from what the line shows.
- Supply, In India Or AbroadStandard grades from stock, certificate of analysis per lot, export packing and documents.
Quality
- ISO 9001:2015 certified quality management
- Certificate of analysis with each lot where the product calls for one
- Particle-size distribution on boron nitride products checked by laser diffraction
- TDS and SDS in GHS format for every grade
Export
- We ship routinely to Middle East, South Asia, Africa & Lat-am
- Export packing, labelling and documents handled by us
- Custom formulations and private-label supply
- Replies on WhatsApp and email across time zones
Choosing A Release Coating
Boron Nitride Vs Graphite
Which release coating to use where, and why boron nitride stays clean and white above 900 °C.
Read The Guide →Hexagonal Vs Cubic Boron Nitride
The soft lubricant and the superhard abrasive: same formula, different crystal, very different jobs.
Read The Guide →Boron Nitride Forms Explained
Spray, suspension, concentrate, wax stick, powder or ceramic: how to choose the form.
Read The Guide →Common Questions
What does Pyroflux India make?
Speciality coatings, release agents, lubricants and fluxes for hot-metal processes: hexagonal boron nitride products, zircon mould coatings, centrifugal casting die coatings, die-casting release agents, forging lubricants, extrusion and casthouse coatings, covering and refining fluxes, high-temperature coatings, gasket release coatings and glass mould release.
Where is Pyroflux India based?
In Delhi-NCR, India, where both the marketing office and the factory are. Pyroflux has been formulating for foundries and metalworking plants since 1990 and is ISO 9001:2015 certified.
Do you export?
Yes. Pyroflux India exports worldwide, shipping routinely to the Middle East, South Asia, Africa and Latin America. Export packing and documents are handled by us.
Can we trial a product before ordering?
Yes. We send a trial quantity with a written application procedure, and adjust the recommendation from what your line shows.
Do you make custom or private-label products?
Yes. Custom formulations and private-label supply are routine. Tell us the substrate, temperature, atmosphere and application method and we formulate to it.
How do I get a TDS or SDS?
Use the datasheet request form, WhatsApp or call. Technical and safety data sheets are issued in GHS format and go out by email, usually within one working day.
Tell Us The Process; We Will Recommend The Grade
Samples, datasheets, quotes and technical questions all start the same way. Most enquiries get a reply the same working day.
- Phone
- +91 98181 87838
- sales@pyroflux.in
- Office
- G-5, Sector 63, Noida 201301, Uttar Pradesh, India
- Factory
- G-15, Sector 63, Noida 201301, Uttar Pradesh, India
- Hours
- Monday to Saturday, 9 am to 6 pm IST